How To Clean The Filter On Whirlpool He3t Washer
Cleaning the Drain Pump Filter/Draining Residue Water on a Front Load Washer
Cleaning the Drain Pump Filter/Draining Residual Water on your Whirlpool Front Load Washer
Annotation: Perform the following procedure occasionally or every 6 months.
- Open the dispenser drawer by pulling on the handle at the base of the washer. This volition reveal the drain pump filter. Remove the drawer by releasing the tab on each side. With your finger, push button downwardly on tab on right side of drawer, and up on tab on left side of drawer.
- Identify a wide, flat container beneath the drain pump filter to collect the drain water. Release the black hose from the hose clip, remove the plug, and drain the hose into the container. Empty the container. Repeat this procedure if necessary until all the water has drained. Make sure that the black hose is completely dry, replace the plug, and secure the hose in the prune. Notation: If water does not drain well, push button in hose slightly to remove whatsoever possible kinks.
- . Lay a cotton material beneath the drain pump filter to absorb whatever water still in it. Then remove the drain pump filter past turning it counterclockwise.
- Remove large clumps of lint past hand from the filter and place lint in a suitable waste container. Remove remaining residue from the filter past rinsing with h2o.
- Reinsert the drain pump filter by turning it clockwise. Make sure to turn information technology in equally far every bit it volition go, with the filter handle remaining as close as possible to the vertical position.
- Replace and close the dispenser drawer. Make sure to insert both rails simultaneously when replacing the drawer. Y'all will hear a clicking sound that indicates the rails take engaged. To ensure proper placement of the drawer, pull out fully. The drawer should be fully engaged and the rails locked in place. Make sure the bleed hose is secured in the hose clip and tucked underneath the cutout.
If y'all would like to download or view product literature for your appliance, delight visit our Manuals and Literature page.
Source: https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Cleaning_and_Care/Cleaning_the_Drain_Pump_Filter%2F%2FDraining_Residual_Water_on_a_Front_Load_Washer
Posted by: pierremagards.blogspot.com
0 Response to "How To Clean The Filter On Whirlpool He3t Washer"
Post a Comment